Vinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.x

GA 06 2016 4The 2nd BERTIM General Assembly meeting was held in La Charité-sur-Loire France on the 07th and 08th of June 2016.

During the General Assembly, the consortium made an overview of the project progress, giving special attention to the review of the finalised  activities and tasks. The first part of the discussion focused on the BERTIM prefabricated modules’ specifications and the BERTIM renovation project decision procedure. These results will serve as a basis for further steps aimed at production of the envelope and 3d modules. Moreover, the specifications and the procedure will be implemented in the RenoBIM tool – an innovative solution that will allow seamless integration of the design and manufacturing processes. Therefore, project partners described current progress in production of the modules as well as RenoBIM tool and presented their plans for the future.

Comment (0) Hits: 1869

renovation project decision making procedureThe report "Renovation project decision making procedure" has been finalised (task 2.4). It describes the procedure of the decision making during the process from first analysis of the building until the start of the detailed design of the modules.

Comment (0) Hits: 7855

BERTIM prefabricated modulesTask 2.3 “BERTIM prefabricated modules’ specifications” defines the general requirements of the prefabricated modules to be designed on WP 3, Task 3.1. The technical design to be done on Task 3.1 will follow the specifications and requirements that result from the work down on this Task 2.3.

Four different products will be developed in the BERTIM project for the energy renovation of the targetable buildings typologies defined: 2D module with insulation, 2D module with insulation + installations (or services), 3D residential module and 3D installations module.

Comment (0) Hits: 1660

Join us on

FacebookLinkedIn Logo.svg

twitter logo